PDA

View Full Version : my ecocker!


NppLWgP
06-11-2005, 03:43 PM
umm i was playing with it one day and then wen i got home, i cleaned it. i put some air in, now it leaks in the front. iono where its leaking from because i took out all the hoses and and put some new ones in but it still leaks.. HELP ME PLEASE!
paintball_karl
06-11-2005, 05:03 PM
it would help if u find where the leak is... cuz it could very in areas on the front block. try checking the seal/o-ring on the frontblock screw, the timing, and the reg pressure
NppLWgP
06-11-2005, 05:05 PM
k!!
ImpactBaller707
06-12-2005, 08:03 AM
make sure all the hoses are tight first.

-Thomas
ShootClassicTimmys
06-12-2005, 06:24 PM
I hate to state the obvious but, make sure the gun is cocked when you put the air in... ::)
NppLWgP
06-12-2005, 06:33 PM
it is.... its leaking from the front. i dont know how to make it stop! :'(
ShootClassicTimmys
06-12-2005, 06:51 PM
Okay, when you say "FRONT" does that mean 3-way or you can hear it coming out of the barrel???
NppLWgP
06-12-2005, 06:56 PM
3 way,
ShootClassicTimmys
06-12-2005, 07:09 PM
Okay, check your LPR...it's either way to low or way to high...
NppLWgP
06-12-2005, 07:11 PM
im scared! :P i dont know wat to do with the lpr!
ShootClassicTimmys
06-12-2005, 07:14 PM
wow....ok, what kind of LPR is it?
NppLWgP
06-12-2005, 07:21 PM
http://img267.echo.cx/img267/9995/image0045ty.th.jpg (http://img267.echo.cx/my.php?image=image0045ty.jpg)

that one! :)
ShootClassicTimmys
06-12-2005, 07:23 PM
Okay....... ::) there should be a hole in the front for an allen wrench. Turn your LPR up until the gun starts shooting...
NppLWgP
06-12-2005, 07:46 PM
the gun shoots.. but like it leaks from the 3 ways somewere. and u know how the velocity should shoot good wen the velocity is turned in 2 full turns? well mine shoots really low. it just gets the ball stuck in my barrel or the ball rolls out..
ShootClassicTimmys
06-12-2005, 07:49 PM
Ajust your regulator...
Bunkerurazz
06-12-2005, 07:51 PM
If it's leaking from the three way and you have an eblade the lpr is turned up too high.
Bunkerurazz
06-12-2005, 07:53 PM
Did you check to see if your bolt is upside down.
ShootClassicTimmys
06-12-2005, 07:55 PM
Iv'e done that before.... ::) I'm such a noob...
NppLWgP
06-12-2005, 07:57 PM
wat about the leaking?
Bunkerurazz
06-12-2005, 07:59 PM
did you try turning the lpr down until it stopped leaking.
Bunkerurazz
06-12-2005, 08:07 PM
Did you check to see if your battery is low. Might want to try a new one.
NppLWgP
06-12-2005, 09:09 PM
heh wens the next time ur going to scp? ill bring it so i wont mess it up!
twotoedtony2
11-19-2005, 11:22 AM
the lpr is up too high.
PimpBallMaster_J.
12-13-2005, 02:32 PM
omg this guy is such a noob adjust ur lpr it is too high ur bolt is upside down take out ur pull pin in the back of the gun that cocks it and turn it inwards until the leaking stops your probobly have ur lpr to high and ur reg is too low...turn the lpr out and the reg inwards...
eblade
03-15-2006, 10:25 AM
turn up your reg a bit and turn down the lpr a bunch.