impy bolt

[bunkeringboy12]

hey guys i was playing in a tourney last week and my gun wsa screwed and my cocker broke. The bolt kept on getting stuck in the front position and wouldnt come back so it leaked. I lubed it as normal then i lubed it more so thats not the problem. Also if anyone knows how to fix imp eyes my eyes would shoot one ball then they wouldnt let me shoot another ball. I have no idea whats wrong there.

Thanks,
Mike

[bunkeringboy12]

come on people i need help and the manual doest say anything about that.

[marine man]

it could be a number of things. did you screw your detent in to much? when your gun is degassed, can you push the back block foward and pull it back?

[cirazno-415]

agree w/ marine...could be a number of things. ? kinda of confusing...Impy bolt or cocker bolt?

Here is some things you could chk.

Impy eyes...

Check if the wires are crimped by the either the board tray screw or the eye cover or the detent screwed in too tight.
If so - need new eye ribbon.

turn on gun and put your finger in there...and c if the eye c's it. If not - then your eyes can need cleaning by using qtip with a less than a drop of rubbing alcahol on it.

See if any connections to the board are loose

Cocker bolt...
Pull bolt out and clean it - maybe a paint chip is keeping it forward.

adjust the cocking rod in...might be too far out. Re-time your cocker.

[impulseDUDE]

i have an impy and that has happened 2 my eyes clean ur eyes when it happened 2 me it was when i first used my impy and when i chronoed later that day it was way faster with eyes maybe needs 2 warm up?

[pbmink]

for the imp shoot like 5 balls on non vision and turn it on again and it shuld shoot fine

as for the cocker re time it ( tends 2 solve all worries )

[moballer1193]

is the bolt getting stuck on ur imp or cocker? if its ur imp, ur dwell is too high, turn it down some. if its ur cocker, you need to get it timed