PDA

View Full Version : E-blades


paint_punk459
08-15-2004, 06:33 AM
i was wondering what shops install eblades and also i was wondering, should i get a eblade or a worrblade, and whats the difference between the two. and last, do u still have to time ur cocker after u have and eblade/worrblade?
JT_man
08-15-2004, 11:52 AM
get the worr blade it has a lil bit more settings and a bigger trigger gaurd for yo fingers and its only alil bit more money and i think ace in stockton instals them or you can go e-blade 2 but its like 500 bucks but its pretty nice it has debounce settings and so on ;D
Cassidy_James
08-15-2004, 11:55 AM
If I were u I'd look at the E2's and see if looks good enough for a little extra money. I personaly would get an eblade over a worrblade just bcuz I tink it's kinda gay that WGP just took the eblade and added a bolt and a few other things. There might be a few good priced eblades on ebay soon bcuz some people will be selling them to get E2's. Eblades are easy to install (except for the eye) but some guns (not a lot)come with an eye hole already milled in for eblade users. Mine didn't, so I put my eblade in myself and I don't use the eye (never put it in)
paint_punk459
08-15-2004, 12:24 PM
well i have a 03 vert cocker and that doesnt come with the drilled eye holes so does like newhere drill eye holes? and how much does it cost?

o yea, and do u still have to time ur cocker with an eblade?
JT_man
08-15-2004, 12:52 PM
when you get the e-blade youll get a manual and it will give you like the angeles and degrees and where to drill and my friend took his gun to a machine shop and gave them the manual and they drilled it for like 25 bucks
buckyshotu
08-15-2004, 01:00 PM
CCM can drill the eye for it and install it.

www.chipleymachine.com
SicJester101
08-15-2004, 01:02 PM
hey zack ....
your questions: who installs and do you have to time

go to most stores that dont just sell tippmans and spyders and ask if they install.

when your get your eblade put on you might want tp play with the sear a little and take it off factory fast and set it up custom to your cocker.
paint_punk459
08-15-2004, 01:23 PM
hey zack ....
your questions: ﾃつ*who installs and do you have to time

go to most stores that dont just sell tippmans and spyders and ask if they install.

when your get your eblade put on you might want tp play with the sear a little and take it off factory fast and set it up custom to your cocker.




so basicly what ur saying is that i will still have to time the sear right? well thanks for the help. ummm... ill probably go to delta paintball and see if they install them.
Davvid
08-15-2004, 01:49 PM
I had mine done at Palmers. perfect ;)
SicJester101
08-15-2004, 01:53 PM
well you can make the gun faster by setting up the sear to be very close (you dont have to worry about short stroking an eblade)
PsybusterX
08-15-2004, 02:09 PM
if you live in roseville, you can bring it to my house i'll install and tune it for free
JT_man
08-15-2004, 02:12 PM
if you live in roseville, you can bring it to my house i'll install and tune it for free
that sounds like a sweet deal ;D
paint_punk459
08-15-2004, 02:31 PM
if you live in roseville, you can bring it to my house i'll install and tune it for free


hey, that sound cool, my cousin lives in roseville so maybe the next time i go there i could do that. ill get back to u on it.
blackmagicbob
08-16-2004, 01:52 AM
eblades do have to be timed.
blackmagicbob
08-17-2004, 06:01 AM
they also have the eblade 2's out now.
paint_punk459
08-17-2004, 08:05 AM
i dont know where to buy those at tho
ThEpBmAsTeR4000
08-17-2004, 10:31 AM
got to planeteclipse.com . i think the e 2's come out in september.
paint_punk459
08-18-2004, 03:55 AM
i went to planet eclipse and they had e blades for like 400 bux but then they had a eblade forlike 320 but it said like the picture illustrates the frame only so does that mean they are selling only the frame? but it did say that they sold it cheap because of a cosmetics flaw so i dont know.
cjpballer
08-18-2004, 05:33 AM
Get an eblade planet eclipse makes them and their better quality worrblades wgp makes and the quality isnt as good.
PsybusterX
08-18-2004, 07:10 AM
what the hell? it's the same quality same everything. THE ONLY thing different is the built in rail, larger trigger guard, and grooved trigger on the worrblade, of course you also get the hammer and bolt.
blackmagicbob
08-18-2004, 08:15 AM
what the hell? ﾃつ*it's the same quality same everything. ﾃつ*THE ONLY thing different is the built in rail, larger trigger guard, and grooved trigger on the worrblade, of course you also get the hammer and bolt.


WORD. just get the eblade and put a nexxus kit on it, the are hella fast if you do that.
blackmagicbob
08-18-2004, 08:15 AM
what the hell? ﾃつ*it's the same quality same everything. ﾃつ*THE ONLY thing different is the built in rail, larger trigger guard, and grooved trigger on the worrblade, of course you also get the hammer and bolt.


WORD. just get the eblade and put a nexxus kit on it, the are hella fast if you do that.