PDA

View Full Version : WAS and 2k5 timmys


evil98punk
07-17-2005, 06:34 PM
Can it be done or no?
1_big_guy
07-17-2005, 06:57 PM
yes it can you would need defrent wires ..the ones that goes to the clammy
PBALLIN
07-17-2005, 07:00 PM
as far as i know it isnt very hard to do, what is hard to impossible is trying to get was with an LCD screen in an 05 frame
-mike
evil98punk
07-17-2005, 08:01 PM
as far as i know it isnt very hard to do, what is hard to impossible is trying to get was with an LCD screen in an 05 frame
-mike


Thats what my fear was.
x-x-x-x-x-x
07-20-2005, 12:31 PM
on an o5 frame it can be done easy, but if it is a critical frame or maby an empire it will need some modification because on a was board the micro switch is not soldered directly onto the board, it is conected by a wire harness and two small holes will need to be drilled and tapped for the harness to mount to the frame. plus you will need new wires.
WhyAreCowsCool
08-07-2005, 01:25 AM
Yeah, I know this is a old thread but I feel the need to clear things up before someone messes up their WAS board.

Yes you can use WAS with 2k2 style harnessing in the 05 frame but you cannot use the LCD. Don't even bother to try because it was never meant to be. With all the wiring, fitting old style boards into the 05 frame is a challenge on its own.

Basically, to use WAS or Frenzy, you have to adjust your setting with your 05 frame open, then you can plug in the membrane and LCD.