Timmy help please

[FUG]

oookk...here we go.

Im new to intimidators i just bought one the other day. when I would put the eye mode into ''forced'' mode it wouldnt fire at all(also i was useing bright red paint), but on the other hand when I would put it on delay it wouldnt fire...but when it shot one ball(after pulling trigger 3 times for delayed, and then it would shoot) it would rip like crazy then i pull the trigger and nothing would happen again. I was wondering if I need new eyes or what is wrong??? It wouldnt fire on forced mode, everyonce and a while, but it wouldnt work more than half the time. I was heated today so if you can tell me a list of things that can be wrong or just one thing I WOULD GREATLY APPRICIATE IT. and dont tell me to search because thats what these places are for quick honest answers. also wen i pull the bolt back with no paint or air and pull the trigger on ''forced'' mode the noid will not click....so im guessing the eyes are fine. someone told me that it could be how the ramcap is adjusted, and how the bolt is alligned but i dont know. Also how can I tell if my eyes are properly aligned? Thanks for all the help.

[ironpanther]

well I would start by saying READ THE TIMMY HELP THREAD! this is all covered in there. but for sake of not being a completely logical person I will answer as much as I can here. One your eyes work fine and these are all classic symptoms of the ram being too far back. You need to check your ram bumper and then if that is in good condition adjust your ram cap(if you have an adjustable ram cap) so that the top of your bolt is just barely visible down the feedneck when it is all the way back. To check your bumper all you need to do is degas the gun and take your ram cap off and see if the black rubber piece is not torn or demolished. If you don't have a black rubber piece and instead the back of the ram has a point on it make sure that you have the little indestructible Oring on that point(this is the newer 2k4 ram, a retrofitted 2k2 type ram will have the bumper pulled out and the point and Oring will be on the ram cap). After all of this to check if your eyes are aligned just turn your gun on with air and no paint. put the eyes in forced mode and pull the trigger ten times or so. if they are aligned the gun will stay in forced mode and the gun won't cycle. If they are out of alignment the gun will switch back to bypass and begin cycling after a few trigger pulls. THE SOLENOID SHOULD NOT CLICK IF THE GUN IS ON FORCED AND THERE IS NOTHING BREAKING THE EYE BEAM! As far as delayed mode goes that is also normal. if the eyes don't see paint they will DELAY a measured amount of time before cycling and all trigger pulls in that delay time will not be completed except for the one which activated the delay response.

BEFORE YOU ASK ANYMORE QUESTIONS THOUGH READ THE TIMMY HELP THREAD!

[FUG]

THANKS ALOT!! i opened my ram cap and the black rubber thing was torn in half!! I never use my timmy so once it broke i didnt bother fixing it. So I should buy a new ram bumper...how much and where to buy. also should i turn the ram in?? and how much of the bolt should I be seeing? OMG dude if this works you are my savior.

[ironpanther]

yes replace the bumper. I already told you the rest.

[IMAGINE_A_SPYDER04]

LoL. IP doesnt like ppl who post things wen there is a help thread. well its ok cuz some ppl dont come here everyday to notice these kinda things.

[ironpanther]

its not that I don't like it its that alof of us have put in the time to develope those threads and make it so that we don't have to answer the same questions over and over.

[IMAGINE_A_SPYDER04]

ya i appreciate that man. The air 101 thread helped me out alot. thanks for that man.

[stupiddogg]

ya i appreciate that man. The air 101 thread helped me out alot. thanks for that man.


Isnt Pat a pimp? ;D