dwell settings

[aaronp]

hey if anybody could tell me how to set the dwell on my impy and what it should be set at i would really appreciate it cuz im playing tomorrow and i need to do it tonight...thnx

[Pvilleplayer]

put a small allen wrench into the little holes in the solinoid tray i think it is called, here, check this out, very easy.


http://www.smartparts.com/Manuals/Impulse.pdf

page 5

[cirazno-415]

Here is what I do to get the correct dwell setting for my impy:

gas it up to 150 psi
then set dwell to 4
shoot over chrono
increase dwell until it makes no difference in volocity-
(inc dwell to 5, shoot over chrono, 6 then shoot over chrono)
then decrease dwell until you see the first decrease in volocity.

That will be your dwell setting for your particular impy.

If you have cricket (blue light) board...just insert a paperclip
into one of the two holes on the noid tray.
Increase = dwell hole closer to the front
Decrease = dwell hole closer to the back of the impy.

Green boards = use a glasses repair screwdriver and turn from either left or right (very small turns at a time) and use method above.