im trying 2 pimp my marker

[xmanluda1027]

on my marker im tryin 2 pimp it up its a diabl bonedaddy gt and yea it excepts spider upgrade and i really want 2 pimp it out and turn it into the ultimate marker it can be without buying a ew gun ok so holaa at me cause i need some help

[ironpanther]

ok first get a hack saw. Next with your favorite color crayon draw your favorite cartoon character on the side of the gun as BIG as possible. Now carefully with the hacksaw cut out the cartoon character. Now you have a cartoon character on a trigger. ;D After your done with that throw it in the trash, go to your local pball proshop, and buy a new gun. Sorry but pimp and bonedady just don't mesh.

[Rico]

perormance wise i would say swtch to high pressure. a good reg like a cp or torpedo (not sure i they go that high) and a new barrel like a stiffi and buy only good paint like gap. these are all important for accuracy. unfortunetly these aren't cheap parts. the reg and paint it sell will cost more then the gun so it's really dosen't make sense to pimp out ur gun. i know people will disagree with me but get an auotcocker if u want to pimp out a gun. they're great i ur technically inclined and really want to customize your own gun, and they are very accurate stock if u get the right paint. they also shoot very straight with HPA or co2 and around here they go for as much as "high end" spyders ($150-$250). i got a cocker here over a spyder amg and i have no regrets. if a bunch of moving parts aren't ur thing samve a little more and get an impluse or bko or somthing.

if ur dead set on pimpin ur gun those are the up grades i'll even do an estimate for you.
-Cp reg $50-$85
-HPA Tank $70-$180
-Stiffi barrel$70-$120
TOTAL
$190-$385

this alot of money for a spyder clone and thats only performance ups. u can easily doubly or tripple this with an adj tank milling and ano.

[MATTY]

ok first get a hack saw. ÂÂ*Next with your favorite color crayon draw your favorite cartoon character on the side of the gun as BIG as possible. ÂÂ*Now carefully with the hacksaw cut out the cartoon character. ÂÂ*Now you have a cartoon character on a trigger. ÂÂ*;D ÂÂ*After your done with that throw it in the trash, go to your local pball proshop, and buy a new gun. ÂÂ*Sorry but pimp and bonedady just don't mesh.


hahahaha

[evil98punk]

ok first get a hack saw. ÂÂ*Next with your favorite color crayon draw your favorite cartoon character on the side of the gun as BIG as possible. ÂÂ*Now carefully with the hacksaw cut out the cartoon character. ÂÂ*Now you have a cartoon character on a trigger. ÂÂ*;D ÂÂ*After your done with that throw it in the trash, go to your local pball proshop, and buy a new gun. ÂÂ*Sorry but pimp and bonedady just don't mesh.


Hahaha!!! Thats the funniest thing I have ever seen a mod. do! Oh man that was great. He's totally right though... Bone daddy's are un-pimpable.

[PosseCapt]

pretty much just do what psy did and put all timmy internals into the body

[Pballer_E-99]

ok first get a hack saw. ÂÂ*Next with your favorite color crayon draw your favorite cartoon character on the side of the gun as BIG as possible. ÂÂ*Now carefully with the hacksaw cut out the cartoon character. ÂÂ*Now you have a cartoon character on a trigger. ÂÂ*;D ÂÂ*After your done with that throw it in the trash, go to your local pball proshop, and buy a new gun. ÂÂ*Sorry but pimp and bonedady just don't mesh.
lmao he right stephen u got a wal mart gun. go buy a spyder or piranah. there fairly cheap

[MATTY]

or timmy

[ironpanther]

pod***** I would argue heartily with you on that one. Of all the guns I have owned(ALOT) I still fall back on my cocker when I just need to mow some serious heads.

[Rico]

the autococker is a really under rated gun. as far as being "more expensive" then a timmy after upgrades all depends on how you look at it. autococker shoot great outta the box but most peopel won't have $800-$1500 a month lying around, but will have about $25-60 a month so u can slowly build up your gun without missing months of game time trying to repay a debt. just my 2 cents.

[PsybusterX]

of get the best of both worlds..build both guns for cheap..i built that "timmy" for less than $400, $500 if i get that classic timmy body... I won't go about my numbers on autocockers, that's secret :)

[BigSexy]

theres no such thing as wasting money on a cocker. i paid $700 for parts and am building my cocker from scratch. i have yet to finish it but when im done i know if i ever have a minor timmy problem and i wanna keep playing that day ( keep in mind i only get time off work to play once every 2 montsh now ) i know that cocker will work because mechanical cockers when timed are flawless......

just wondering. when building a cocker how tight does the jam nut go, and how far do i screw the RAM to the pump arm, same question for 3-way to actuator rod? i know i ask many a question about building cockers but i cant seem to find that video on how to build, time, and tech them.

[paint_punk459]

if u wanna learn how to time ur cocker then look for the video at www.cockertech.com

[ironpanther]

three way to actuator rod is part of timing so is gun specific but it should be screwed in at least so when the trigger is all the way back the three way is all the way back. ÂÂ*From there it is a matter of timing. ÂÂ*The pump arm should be screwed in to the ram as far as possible making sure that it does not actually collide with the back of the ram housing and there is still enough to screw the back block on. ÂÂ*Which jam nut are you reffering to?

[xmanluda1027]

ok u can stop posting im getting a new gun so it dont matter