any max-flow tecs that can help me?

[ThEpBmAsTeR4000]

hey i was playen at wap this weekend and i went to git my manifold max-flow w/ - 68/45 filled and i got it filled to 4 and i took it back to where i was sitten filled my hopper with paint turned on the air and the bolt locked back and was rdy to go so i set it down then started talking and like 2 min later there was a boom at frist i thought the macro came off but it didnt and all the air was leaken out of my max-flow through the emergency valve and the pressure gauge arow was broken. does anyone know wut happend? or how i could fix this?

thnks 4 your time,

corey

[ThEpBmAsTeR4000]

up

[Kaleb_Voris]

it made a big boom

[PsybusterX]

looks like there was creep going on and it busted up your internals, you'll need to take it to a store so they can replace the reg seat, gauge, and any other parts that might have been damaged. you always need to keep the maxflo well lubed otherwise that will happen. lube it more than just when you go to play, it's that touchy.

[OakLand HellRaiser]

hate maxflows. a 150 buck reg that is ****ty, dynasty and such need to be paid to use those things. But they work.......or do there job.....kinda

Unless u lube every case everyother time ur screwed........its a pain in the asssssssssssssssss. A manifold is not as hard is a regualtor maxflo, cause a maxy takes a ****load to unscrew......

I would just go to a good shop and tell em to fix it.........don't bother urself, just a ****load of trouble if u do.

[ThEpBmAsTeR4000]

ok thank you guys, now i just need to find a store close to me to fix it.