05 shocker help.

[ThEpBmAsTeR4000]

my shocker will shoot fine with 1 shot . but as soon as i walk it and it starts to ramp. the velocity willl go down. and with a diff reg on (cp) other then the max-flow one. it will leak internaly maybe from the manifold? idk. pls help.

[Ice_Jester]

sounds like ur LPR is under pressure, and thats not allowing your noid to recharge fast enough. Or your LPR is over pressure, and will fire fine for a little, and then will have to blow off so that it doesnt blow. I dont know much bout the manifolds of a shocker, but i know the LPR workings. So check those out.

[AsianXpaintBaller]

umm... shockers dont have LPRs. Try lubing your reg and your bolt. Try taking off the manifold and lubing the orings.

[nickers]

i have a shocker and i did the same thing to mine there is a wire that ataches to ur board to your noid the 3ed wire on the right side if it is unpluged put it back in for some reason it makes it ramp
after 6 shots and faster than 6 bps

[ptr]

what are good setting for a 05 shocker with a nerve board, i just need the dwell setting.

[ThEpBmAsTeR4000]

55

[ptr]

55


thanks, thats 55 cirps from the bottom right