ego ballers

[drunkballer77]

hey ego ballers.... whats the settings u guys have on ur ego??? ??? ???

[alias_killa]

yah im looking for some to for the 1.00 mine are just stock and only getting like 11 want them fast but leagul

[Pvilleplayer]

Dye39...after a little experimentation on team guns out at HB we came up with a good starting point for almost all the EGOs we upgraded...(over 200 total)

TT BAND 75%
TT TOL 6
TREL 4
TPUL 6

this killed all bounce on pretty much all the EGOs without effecting the ROF at all depending on the gun setup

I used TT band 75, TT TOL 6, TREL 4, and TPUL 5 on my EGO and it shot 20 BPS over the robot passing with flying colors...Junior from Nexus used it all weekend!

sorry i forgot who posted that on the nation but that is directly from them. My ego has been backordered for 3 weeks now so i havnt tried them yet obviously. and here is another thing "moose"... appearntly some kind of ego god (egoowners.com owner is all...) posted this:



Settings made Easy - By Moose/Mr Moose

Okay guys, since everybody wants awesome settings, here we go.

For best air effeciency, to be honest, put your LPR 1 turn in from flush, and use these settings.

Dwell: 8
Empty: 1
Ball: 1
Pull: Depending on how bouncy you want it, 1-6, 1 being more bouncy
Release: Depending also on bounce, 1-4, 1 being bounciest
TT Tol: 8-10
TT Band: 75 is great

For a setting for extremely brittle paint, and to what I have found, a little more accurate.

LPR 2 turns in

Dwell: 10
Empty: 1
Ball: 1
Pull: Depending on how bouncy you want it, 1-6, 1 being more bouncy
Release: Depending also on bounce, 1-4, 1 being bounciest
TT Tol: 8-10
TT Band: 75 is great

Basically, you will always want to keep the empty at 1. I will break it down for you.

Ball setting works like this, you set a millisecond time. When the eyes read something breaking the beam for the eyes, for that set amount of time, it will shoot. 1 for a Ball setting is most responsive.

Now, the empty works the same way, the eyes have to read a blank, for the amount of time you set it, 1 ms. If the stock settings are at 2 ms, you risk a chop, because if the eyes are taking 2 ms to read a blank, it will still shoot a ball in between that time, some people have burst speed in walking, and can hit that time in between, while a ball is feeding in, 1 ms is most responsive in that it will tell itself not to shoot if there is no ball, FASTER, than it would with a stock setting of 2 ms.

If you just want insane illegal settings, set your trigger so when you touch it, it activates (dont get smart lol)
and use these

Pull 1
Release 1
TT Tol 100
Band 10

Thanks,
Moose






i cant wait for my ego. god damn firstcallpaintball.

[mobbology]

Pull 1
Release 1
TT Tol 100
Band 10







i cant wait for my ego. god damn firstcallpaintball.



PULL 0
RELEASE 1

this is the way to go.....gotta also tune your trigger pull in TT band. WHen u pull the trigger you can see the Bar raise.....HOld down the trigger and adjust the trigger with a allenkey to stop the pull @ 97-98. This is the fastest insane settings. Moose never advised this.

[drunkballer77]

thanks pville n mobb.... right on...